VividTi’s Titanium Full Engine Bay Hardware Kit is a great way to bring that beautiful vivid shine to your engine bay!
This kit has 78 CNC pieces for the WRX/STi!
There are very slight differences between the WRX and STi when it comes to this kit depending on your personal setup. You may end up with a few extra pieces or find locations you can use them.
IMPORTANT – When installing Titanium you do not want finger oils on them. Wear gloves so that the colors stay bright and clean!
No Power tools! Keep the nice edges and install with hand tools only!
Available in Raw Polished, Rose Gold, Gold, Deep Blue, Skyline Blue, Midnight Purple, Tial Purple, Pink & Green!
Fitment:
2008 - 2021 WRX and STi
May fit other body styles, Do your own visual count and match before ordering.
Kit contents:
A/C Bracket
- (4) M10x29mm bolts (14MM head)
Air Pump
- (2) M8x25mm bolts (12MM head)
- (2) M6x16mm bolts (10MM head)
Battery Tie Down
- (2) M6 nuts (10MM head)
Brake Booster
- (2) M8 nuts (12MM head)
Blow Off Valve
- (2) M8x21mm bolts (12MM head)
Boost controller mount (depends on setup few extras supplied)
- (2) M6x16mm bolts (10MM head)
- (2) M6 Nuts (10MM head)
- (1) M8x21mm bolts (12MM head)
Coolant Expansion Tank Reservoir (STi)
- (2) M8x21mm bolts (12MM head)
- (1) M8 nut (12MM head)
ECU Mount (WRX)
- (2) M6x16mm bolts (10MM head)
Factory fuel line
- (2) M6x16mm bolts (10MM head)
Factory Intercooler
- (2) M8x21mm bolts (12MM head)
- (2) M8x30mm bolts (12MM head)
Fenders
- (6) M6x16mm bolts (10MM head)
Front Strut tower
- (6) M8 nuts (12MM head)
Front Top Bumper Support
- (6) M6x16mm bolts (10MM head)
Fuse Box
- (3) M6x16mm bolts (10MM head)
Headlights
- (4) M6x16mm bolts (10MM head)
Hood Hinge Brackets
- (4) M8 nuts (12MM head)
Hood Latch hook (Front center of hood)
- (2) M8x21 bolts (12MM head)
Intake Bracket
- (4) M6 Nuts (10MM head)
Power steering reservoir (STi)
- (2) M6x25mm bolts (10MM head)
- (1) M8x21mm bolt (12MM head)
Radiator Fans
- (4) M6x16mm bolts (10MM head)
Radiator Mount Brackets
- (2) M8x21 bolts (12MM head)
- (2) M8x21 bolts (12MM head) Right Next to bracket on core support
Vacuum Pump
- (2) M6x25mm bolts (10MM head)