VividTi Titanium Transmission case bolts Kit's are made of high quality GR5 Titanium. This 6pt bolt kit requires a 12mm and 14mm Socket. These are to ONLY be installed with hand tools and torqued to spec at 20 ft-lbs for case bolts, and 33 ft-lbs for reverse idler bolt.
Not only will this bolt kit accurately seal, it will look amazing! Titanium is lighter, stronger, and will not corrode like your factory steel bolts or studs.
Replace those factory intake/exhaust manifold bolts and studs that can rust, cross thread or snap off! Get more strength for your turbo manifold or aftermarket header system!
These kits include the following:
B Series Front Wheel Drive
Case bolts
(16) M8x1.25x40mm 6pt (12mm) torqued to spec at 20 ft-lbs
Reverse Idler Bolt (Reuse washer)
(1) M10x1.25x35mm 6pt(14mm) torqued to spec at 33 ft-lbs
B Series All Wheel Drive
Case bolts
(14) M8x1.25x40mm 6pt (12mm) torqued to spec at 20 ft-lbs
(1) M8x1.25x90mm 6pt (12mm) torqued to spec at 20 ft-lbs
Reverse Idler Bolt (Reuse washer)
(1) M10x1.25x35mm 6pt(14mm) torqued to spec at 33 ft-lbs
K Series Front Wheel Drive & All Wheel Drive
Case bolts
(15) M8x1.25x40mm 6pt (12mm) torqued to spec at 20 ft-lbs
(2) M8x1.25x65mm 6pt (12mm) torqued to spec at 20 ft-lbs
Reverse Idler Bolt (Reuse washer)
(1) M10x1.25x50mm 6pt(14mm) torqued to spec at 33 ft-lbs
DO NOT OVER TIGHTEN OR YOU MAKE BREAK THE CASING!
Available in Raw Polished, Burnt, Skyline Blue, Deep Blue, Rose Gold, Gold, Midnight Purple, Tial Purple, Pink & Green.
Questions about compatibility with your engine? Email us at Josh@vividti.com